Payment & Shipping Terms:
|Product Name:||40g Qsfp LX4||Transmitter:||4 CWDM Un-cooled DFB Laser|
|Receiver:||4CH PIN Photo Detector Array||TX Output Power:||-7.5~+3.5dBm|
|RX Sensitivity:||-11.5dBm||Connector:||Duplex LC/UPC|
qsfp transceiver module,
40g optical module
40g Optical Transceiver Qsfp Lx4 For Ethernet 150m Mmf And 2km Smf
40G QSFP LX4 is a transceiver module designed for optical transmission applications over both MMF and SMF with transmission distances of up to 150m on MMF (OM3) and 2km on SMF. The module converts 4 inputs channels (CH) of 10Gbps electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gbps optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gbps input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface.
For applications over OM3/OM4 MMF, MMF cables are directly connected to the LC connectors of QSFP+ LX4 module and optical signal is directly launched from the transmitter into the MMF cable. For applications over SMF, the module is used as a QSFP+ IR4 module and SMF cables are directly connected to the LC connectors.
|Package (Form Factor)||QSFP+ LX4|
|Data Rate (typical)||10.3 Gbps/CH|
|Distance||150M MMF and 2KM SMF|
|Transmitter||4 CWDM un-cooled DFB Laser|
|Receiver||4CH PIN photo detector Array|
|TX Output Power (dBm)||-7~+3.5|
|RX Sensitivity (dBm)||-11.5|
|Low/High Case Temperature||0°C~70°C|
|Voltage Supply (typical)||3.3v|
40G QSFP+ SR4 Product
|QSFP-40GB-LX4||40G LX4 QSFP+ Transceiver 150m Mmf And 2km Smf|
FAQ(Frequently Asked Questions)
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable,We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship 1~3 days after PO.For big quantity and special products,Please check lead time with our sales.
3. Dose your modules compatible to (HP/Extreme/Juniper,ect)
Yes,we code the optical transceivers compatible to (HP/Extreme/Juniper).
4. What is your warranty time
We promise 3 years warranty for all products shipped from us.
5. Could I use our own logo and label?
Yes,we could provide a OEM service and make the products with your own label.
Contact Person: sales