Payment & Shipping Terms:
|Datarate:||25.78 Gbps/CH||Diagnostics:||Digital Monitor|
|Transmitter:||4CH Cooled EML Laser||Receiver:||4CH PIN Photo Detector Array|
|TX Output Power:||-4.3~+4.5dBm||Connector:||Duplex LC/UPC|
Lr4 100g Qsfp28 Transceiver For Data Center And Ethernet Qsfp28 10km 4cwdm On Smf
QSFP-100G -LR4 is a 100Gbps transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gbps electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gbps optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gbps optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.
The central wavelengths of the 4 CWDM channels are 1295.56, 1300.05, 1304.58 and 1309.14 nm,The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA).
Hot pluggable QSFP28 MSA
Compliant to IEEE 802.3ba 100GBASE-LR4
Up to 10km reach for G.652 SM FIBER
Single +3.3V power supply
Operating case temperature: 0~70C
Transmitter: cooled 4x25Gb/s EML
TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
Receiver: 4x25Gb/s PIN
Maximum power consumption 4.0W
Duplex LC receptacle
|Package (Form Factor)||QSFP28-100G-LR4|
|Data Rate (typical)||25.78 Gbps PER CH|
|Distance||10km on SM FIBER|
|Transmitter||4CH Cooled EML|
|TX Output Power (dBm)||-4.3~+4.5dbm|
|RX Sensitivity (dBm)||-8.6dbm|
|Low/High Case Temperature||0°C~70°C|
|Voltage Supply (typical)||3.3v|
|Connector||Duplex LC UPC|
Infiniband QDR and DDR interconnects
Client-side 100G Telecom connections
Cisco QSFP28 100G Product
|QSFP-100G-LR4||100GBASE LR4 10km QSFP Transceiver over SM fiber|
FAQ(Frequently Asked Questions)
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable,We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship 1~3 days after PO.For big quantity and special products,Please check lead time with our sales.
3. Dose your modules compatible to CISCO.(HP/Extreme/Juniper,ect)
Yes,we code the optical transceivers compatible to CISCO(HP/Extreme/Juniper).
4. What is your warranty time
We promise 3 years warranty for all products shipped from us.
5. Could I use our own logo and label?
Yes,we could provide a OEM service and make the products with your own label.
6. Could I return the products if there is a quality problem?
Yes,if there is a quality problem happen,including products defects,.we could accept free exchange or return and refund.
Contact Person: sourcelight